The 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) version 2 course. The exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small to medium-size enterprise branch network. The exam includes topics on LAN switching technologies, IP routing technologies, IP services (FHRP, syslog, SNMP v2 and v3), troubleshooting, and WAN technologies.
1.0 LAN
Switching Technologies
|
21%
|
|
|
1.1
Identify enhanced switching technologies
·
1.1.a RSTP
o 1.1.b
PVSTP
·
1.1.c EtherChannels
1.2
Configure and verify PVSTP operation
·
1.2.a Describe root bridge
election
·
1.2.b Spanning tree mode
|
||
2.0 IP Routing Technologies
|
26%
|
|
|
2.1
Describe the boot process of Cisco IOS routers
2.2
Configure and verify the operation status of a serial interface
2.3
Manage Cisco IOS files
·
2.3.a Boot Preferences
·
2.3.b Cisco IOS Images (15)
·
2.3.c
Licensing
o 2.3.c
[i] Show license
o 2.3.c
[ii] Change license
2.4
Differentiate methods of routing and routing protocols
·
2.4 a Administrative distance
·
2.4.b Split horizon
·
2.4.c Metric
·
2.4.d Next hop
2.5
Configure and verify OSPF (multi-area)
·
2.5.a Neighbor adjacencies
·
2.5.b OSPF states
·
2.5.c Configure OSPv2
·
2.5.d Configure OSPv3
·
2.5.e Router ID
·
2.5.f Understand LSA types and
purpose
2.6
Configure and verify EIGRP (single AS)
·
2.6.a Feasible distance/feasible
successors/administrative distance
·
2.6.b Feasibility condition
·
2.6.c Metric composition
·
2.6.d Router ID
·
2.6.e auto summary
·
2.6.f Path Selection
·
2.6.g Load
Balancing
o 2.6.g
[i] Unequal
o 2.6.g
[ii] Equal
2.7
Passive Interface
|
||
3.0 IP Services
|
6%
|
|
|
3.1
Recognize high availability (FHRP)
·
3.1.a VRRP
·
3.1.b HSRP
·
3.1.c GLBP
3.2
Configure and verify syslog
·
3.2.a Utilize syslog output
3.3
Describe SNMP v2 and v3
|
||
4.0 Troubleshooting
|
32%
|
|
|
4.1
Identify and correct common network problems
4.2
Utilize netflow data
4.3
Troubleshoot and resolve spanning tree operation issues
·
4.3.a Verify root switch
·
4.3.b Verify priority
·
4.3.c Verify mode is correct
·
4.3.d Verify port states
4.4
Troubleshoot and resolve routing issues
·
4.4.a Verify routing is enabled
(extenSible and Hierarchical Interaction Protocol(SHIP))
·
4.4.b Verify routing table is
correct
·
4.4.c Verify correct path
selection
4.5
Troubleshoot and resolve OSPF problems
·
4.5.a Verify neighbor
adjacencies
·
4.5.b Verify hello and dead
timers
·
4.5.c Verify OSPF area
·
4.5.d Verify interface MTU
·
4.5.e Verify network types
·
4.5.f Verify neighbor states
·
4.5.g Review OSPF topology table
4.6
Troubleshoot and resolve EIGRP problems
·
4.6.a Verify neighbor
adjacencies
·
4.6.b Verify AS number
·
4.6.c Verify load balancing
·
4.6.d Verify split horizon
4.7
Troubleshoot and resolve inter VLAN routing problems
·
4.7 a Verify connectivity
·
4.7.b Verify encapsulation
·
4.7.c Verify subnet
·
4.7.d Verify native VLAN
·
4.7.e Port mode trunk status
4.8
Troubleshoot and resolve WAN implementation issues
·
4.8.a serial interfaces
·
4.8.b frame relay
·
4.8.c PPP
4.9
Monitor NetFlow statistics
4.10
TS EtherChannel problems
|
||
5.0 WAN Technologies
|
15%
|
|
|
5.1
Identify different WAN Technologies
·
5.1.a metro ethernet
·
5.1.b vsat
·
5.1.c cellular 3g/4g
·
5.1.d MPLS
·
5.1.e T1/E1
·
5.1.f ISDN
·
5.1.g DSL
·
5.1.h frame relay
·
5.1.i cable
·
5.1.j VPN
5.2
Configure and verify a basic WAN serial connection
5.3
Configure and verify a PPP connection between Cisco routers
5.4
Configure and verify Frame Relay on Cisco routers
5.5
Implement and troubleshoot PPPoE
|
||
No comments:
Post a Comment